diff -urpN --exclude-from=/home/davej/.exclude bk-linus/drivers/usb/storage/unusual_devs.h linux-2.5/drivers/usb/storage/unusual_devs.h
--- bk-linus/drivers/usb/storage/unusual_devs.h	2002-11-21 02:19:20.000000000 +0000
+++ linux-2.5/drivers/usb/storage/unusual_devs.h	2002-11-21 18:01:33.000000000 +0000
@@ -128,6 +128,21 @@ UNUSUAL_DEV(  0x04ce, 0x0002, 0x0074, 0x
 		US_SC_SCSI, US_PR_BULK, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Reported by Leif Sawyer <leif@gci.net> */
+UNUSUAL_DEV(  0x04ce, 0x0002, 0x0240, 0x0240,
+		"H45 ScanLogic",
+		"SL11R-IDE 9951SQFP-1.2 K004",
+		US_SC_SCSI, US_PR_BULK, NULL,
+		US_FL_FIX_INQUIRY | US_FL_SL_IDE_BUG ),
+
+/* Reported by Rene Engelhard <mail@rene-engelhard.de> and
+    Dylan Egan <crack_me@bigpond.com.au> */
+UNUSUAL_DEV(  0x04ce, 0x0002, 0x0260, 0x0260,
+		"ScanLogic",
+		"SL11R-IDE unknown HW rev",
+		US_SC_SCSI, US_PR_BULK, NULL,
+		US_FL_SL_IDE_BUG ),
+
 /* Most of the following entries were developed with the help of
  * Shuttle/SCM directly.
  */
@@ -220,6 +235,12 @@ UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x
 		US_SC_SCSI, US_PR_CB, NULL,
 		US_FL_SINGLE_LUN | US_FL_START_STOP | US_FL_MODE_XLATE ),
 
+UNUSUAL_DEV(  0x54c, 0x0010, 0x0106, 0x0328,
+		"Sony",
+		"DSC-P5",
+		US_SC_SCSI, US_PR_CB, NULL,
+		US_FL_SINGLE_LUN | US_FL_START_STOP | US_FL_MODE_XLATE ),
+
 /* Reported by wim@geeks.nl */
 UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100, 
 		"Sony",
diff -urpN --exclude-from=/home/davej/.exclude bk-linus/drivers/usb/storage/usb.h linux-2.5/drivers/usb/storage/usb.h
--- bk-linus/drivers/usb/storage/usb.h	2002-11-21 02:19:21.000000000 +0000
+++ linux-2.5/drivers/usb/storage/usb.h	2002-11-21 18:01:33.000000000 +0000
@@ -103,6 +103,7 @@ struct us_unusual_dev {
 #define US_FL_SCM_MULT_TARG   0x00000020 /* supports multiple targets	    */
 #define US_FL_FIX_INQUIRY     0x00000040 /* INQUIRY response needs fixing   */
 #define US_FL_FIX_CAPACITY    0x00000080 /* READ CAPACITY response too big  */
+#define US_FL_SL_IDE_BUG      0x00000100 /* ScanLogic usb-ide workaround */
 
 #define US_FL_DEV_ATTACHED    0x00010000 /* is the device attached?	    */
 #define US_FLIDX_IP_WANTED   17  /* 0x00020000	is an IRQ expected?	    */